| 1. | Standard test method for measuring the nominal thickness of geosynthetics
测量土工织物和地膜标定厚度的标准试验方法 |
| 2. | Nominal thickness of jacket
护套标称厚度 |
| 3. | Insulated nominal thickness
绝缘标称厚度 |
| 4. | Standard test method for measuring nominal thickness of permanent rolled erosion control products
永久滚轧防腐蚀产品的标称厚度的测量的标准试验方法 |
| 5. | All boards and planks must be cut sufficiently full to stand the nominal thickness after kiln drying to 8 % moisture contents
拙译：所有木板必须经充分切割，使其标称厚度可以承受湿度为8 %的烘烤。 |
| 6. | For a sheet of nominal thickness not listed in the table , the permissible variations shall be the same as the next greater thickness
对于标称厚度不在所列的优选厚度之一者,其允许偏差应采用下一个较大的优选厚度的偏差。 |
| 7. | Plates shall be ordered to theoretical weight , the added value to nominal thickness listed in table 2 shall be the theoretical thickness for calculating the weight
钢板按理论重量交货，用表2所列的公称厚度的附加值作为计算重量的理论厚度。 |
| 8. | Plates shall be ordered to theoretical weight , the added value to nominal thickness listed in table 2 plus nominal thickness shall be the theoretical thickness for weight calculation
钢板按理论重量交货，用公称厚度加表2所列的附加值作为计算重量的理论厚度。 |
| 9. | Nominal thickness of insulatioh should be in accordance with the stipulations of table 1 , table2 . - 10 % discrepancy is allowed , but the minimum thickness should be not less than 90 % - 0 . 1 of nominal thickness
2绝缘绝缘标和厚度符合表1 、表2的规定，允许有- 10 %的偏差，其最薄厚度应不小于标称厚度的90 % - 0 . 1 |
